Under what circumstances will the reducer burn out

Reducer is a common deceleration device, which is very convenient to use and protect. If it is used improperly for a long time in the process of application, the reducer will be damaged. If it is serious, it may be burnt out. Under what circumstances will the timing of deceleration be burnt out?

1. Repeated use will do great harm to the reducer. When the reducer is turned on and off, the current is very large. If the reducer runs repeatedly for a long time, it will burn out.

2. The transmission is obstructed. If it is stuck in the process of mechanical operation, a lot of heat will be generated in the reducer, and then the machine will be burnt out.

3. Three phase electric voltage instability, including three-phase electric voltage is not the same, three-phase electric phase missing, voltage too low level.

4. If the motor gets water, the damage is also very big. If the motor gets water and is powered on again, the internal short circuit will occur, and then the machine will be burned.

5. If we overload the reducer for a long time, if the power selection of the reducer is wrong, if we overload the reducer for a long time, the reducer itself will heat up and burn out for a long time.